Painel de Controle de Programas e Eventos (Dashboard) / Usando o Painel de Controle (Dashboard)

This page is a translated version of the page Programs & Events Dashboard/Using the Dashboard and the translation is 27% complete.
Outdated translations are marked like this.

Manage and track Wikimedia programs from one place with ease.

Programs & Events Dashboard


Esta página de documentação é dedicada ao "Painel de Controle de Programas" (Programs and Events Dashboard), disponível em outreachdashboard.wmflabs.org. O propósito básico do painel de controle (dashboard) é prover um caminho fácil para organizar grupos de editores que estão trabalhando em projetos em comum, e tornar fácil o acompanhamento do que eles estão fazendo e como eles estão contribuindo.

É uma versão do Wiki Education Foundation’s WikiEdu Dashboard, que está disponível somente para curso realizados em universidades norte-americanas na Wikipédia em inglês. O Painel de Programas e Eventos (Programs and Events Dashboard) funciona para vários programas em diferentes idiomas assim como qualquer projeto Wikimedia.

Porque usar o Painel de Programas e Eventos?

O Painel de Programas e Eventos foi desenvolvido para o gerenciamento e acompanhamento de editores em programas que contam com:

  1. Tempo limitado: eles têm começo e fim
  2. Foco: eles não se sobrepõem a outras atividades de edição ou em atividades em que editores estão trabalhando individualmente em artigos distintos delegados a eles
  3. Trabalho colaborativo: Ele consiste num grupo específico de colaboradores com nomes de usuário rastreáveis e documentados.

Para mais informações sobre o painel de controle, veja a página principal de documentação de documentos (main documentation page) e as Perguntas Frequentes.

Noções básicas

Autenticação

Boas Vindas & Propósito do Painel de Controle (1 de 5)

A plataforma usa OAuth para logar com sua conta Wikimedia global.

Se você clicar no ícone "Sign up" sem ativar a sua conta Wikimedia, você será direcionado para a página da Wikipédia para criar a sua conta. Neste caso, uma vez que criar a sua conta e aprovar o uso do OAuth, você será direcionado de volta para o Painel de Controle.

Se você clicar no botão "Log in", você será direcionado à Wikipédia para logar, então o OAuth irá solicitar permissão para o Painel de Controle (Dashboard) interagir com as páginas usando a sua conta. Uma vez que estiver logado, você será direcionado de volta ao Painel de Controle.

‘’Nota‘’: A permissão OAuth pede para "interagir com as páginas; editar páginas existentes; criar, editar e mover páginas". Esta função é raramente usada, e não é muito aplicada nesta ferramenta.

Navegar no Painel de Controle

 
Note as abas Explorar e Meu Painel de Controle (Dashboard) no lado esquerdo do menu do topo da interface.

A maioria das atividades que você precisará poderá ser encontrada na aba "Meu Painel" (My Dashboard). Esta aba está posicionada no lado esquerdo do topo da página. Essa aba apresenta um portal para todas as páginas às quais você aderiu, além de oferecer a oportunidade de criar novos programas.

A primeira aba no topo, "Explorar", permite explorar programas existentes, e encontrar e clicar nas páginas de campanhas e eventos ativos. Entrar na página da campanha vai mostrar todos os eventos que são parte dessa campanha.

A segunda aba do topo, "Meu Painel", permite explorar os programas dos quais você está envolvido de alguma maneira. Essa aba também permite que você crie programas e que encontre programas para participar.

Alterando o idioma da interface

O idioma padrão da interface do Painel de Controle é o inglês ou o idioma que o seu navegador adota como preferencial.

 
No lado direito no topo da interface, próximo aos botões Sair e Nome de usuário, você encontra os idiomas disponíveis.

Para alterar o idioma da interface, vá até o topo da página, na direita, e clique em cima do botão referente ao idioma desejado. A ferramenta usa o mesmo tipo de seletor universal de idiomas usado no Wikipedia.

Até agora, quase todos os idiomas testados na plataforma estão funcionando. Para traduzir a interface para mais idiomas, veja o Projeto em Translatewiki. Se o script não estiver funcionando corretamente, por favor reporte enviando um e-mail para dashboard@wikimedia.org ou submetendo um problema (bug) no Phabricator.

Participando de um Programa

Passo a Passo do Painel de Controle para Participantes (2 de 5)

Você está participando de um programa ou evento (como uma maratona de edição, uma aula na universidade, ou outra situação colaborativa que envolve edição de projetos Wikimedia ou carregamento de mídias no Commons). O realizador do programa já deve ter incluído o programa no Painel de Controle; há algumas maneiras de entrar nele. Se você ainda não estiver logado no Painel de controle, veja como logar no Painel de Controle.

Se o organizador compartilhou um link com você

Organizadores de programas que criam programas no Painel de controle podem compartilhar um link para inscrição de participante, para facilitar a entrada via e-mail ou link direto. Este é o link para o programa no painel e seu código é gerado de forma randômica. O formato desse endereço de link deve parecer com o abaixo:

https://outreachdashboard.wmflabs.org/courses/WMF/test?enroll=jbnkodpt

https://outreachdashboard.wmflabs.org/courses/WMF/test?enroll=jbnkodpt

Se você não logou no Painel de controle, ele vai solicitar que você logue ou crie uma nova conta. Veja Como logar no Painel de Controle. Uma vez que você esteja logado, você verá uma janela que se parece com essa.

 
Opções para entrar em um programa

Assim que as opções estiverem disponíveis, clique no botão "Entrar (Join)".

Parabéns, você entrou no curso!

Se você precisar encontrar um programa no Painel de Controle

Se o organizador não compartilhou o link, você pode encontrar um programa no Painel de Controle e entrar nele. Abra o Painel de Controle, clique no botão "Explorar" no lado esquerdo do topo da página ou no botão "Encontrar um programa".

 

Isso abrirá uma lista dos programas no Painel de controle, filtrados na ordem do mais ativo para o menos ativo.

 

Deslize a lista para baixo ou use CTRL+F (⌘+F em computadores Mac) para achar o título de seu programa. Clique no título para ir à página de seu programa. Na página do programa, há um botão cinza para "Participar do programa".

 

Vai abrir uma caixa que requer uma senha

 

Se você não tiver a senha, entre em contato com quem criou o programa, que pode daí compartilhá-la com você. Quando clicar "OK", você estará inscrito no programa.

Iniciando novos programas

Como usar o Painel de Controle (3 de 5)

Se você for o responsável por um programa ou evento, você precisa ser capaz de criar eventos. Há duas formas distintas de criar um programa: ao criar um novo or ao clonar um já existente.

 
Para criar um programa novo, comece por encontrar o botão "Criar um novo programa" no lado direito da tela

Criando um novo evento

  • Click the “Create an Independent Program” button in your “My Dashboard” menu. This will take you to the next page.
  • Click on a program from the list of programs displayed, to proceed to the next page.
  • Fill out a form with the following fields:
  1. Program title -- a title which describes the program or event concisely – Once recorded this information cannot be edited
  2. Institution -- a field used to describe the host for the program – Once recorded this information cannot be edited
  3. Program Description -- free text field that can include long strings of text.
  • Click "Next" to proceed to the next page
  • Fill out the Dates
  1. Start of activity tracking -- use the calendar selector or type in a date in the YYYY-MM-DD format. Especially if the event is during a window of time with other similar events, make sure to specify HH:MM.
  2. End of activity tracking -- use the calendar selector or type in a date in the YYYY-MM-DD format. Especially if the event is during a window of time with other similar events, make sure to specify HH:MM.
  • Click "Create my Program"
Note: you can update all of this information except for the title and institution after you create the event. If you make a mistake in either the title or the institution, you can delete the program until a participant is added to the program, then you have to ask a Dashboard admin to delete it for you by emailing dashboard wikimedia org.

Once you fill out the form, and click “Create my Program!” you will create the page, and as a program leader, will be able to keep updating the program page as needed (see the section below for “Updating Program Information”).

Cloning a program

 
Once you have been involved in a program, the "Clone Previous Program" button will appear in the dialogue following when you click on "Create a New Program" in the Dashboard

If you want to recreate a program or event that you previously facilitated or participated in, you can “clone” the program to keep the description, title and institution. To do this:

  • Go to “My Dashboard”
  • Click “Create an Independent Program”
  • Click “Clone Previous Program”
  • In the dropdown box, choose from among your programs the one you want to clone
  • Click “Clone This Program”
  • Fill out this form as you would normally when creating a new program
  • Click “save”

Updating Program Information

 
The administrative interface for a program page. Notice how the top right of the Program description and detail boxes both have "Edit" buttons for program organizers

The description and start and end time can be updated after the initial creation of an event. To modify the description, click the “Edit Description” button. To modify the start or end times or other details, click the “Edit Details” button.

Additionally, once an event is created, you can update additional information in the event, such as:

  • Facilitators — by default the program page creator is entered as a “Facilitator on the Event”. Additional facilitators can be added from among registered Wikipedians from among contributors who have signed into the dashboard before. Facilitators have the right to edit the program page.
  • Passcode — which can be used to restrict the participants in an event
  • Scheduling a data update — this requests that the servers recalculate the contributions of editors in an event (this allows for you to query historical data for past events, to see updates of data).

Deleting a Program

 
The administrative interface for a program page. On the right, notice the "Delete Course" button, which is only available when a program includes no participants

Only programs with no participants in them can be deleted by their facilitators. Once a participant is added to a program, email dashboard wikimedia org to get the program deleted.

To delete a program without participants, follow these steps:

  • Go to the program page
  • In the bottom right “Actions” section, choose the “Delete Course” button.
  • Type the title of the event in the box, to confirm you want to delete the event
  • Click the “Delete" button.
  • The event will be deleted.

Adding contributors

 
You can add contributors to the Program as a program leader options through the "Participation" button the Editors tab

Program leaders can add contributors directly to the event:

  • To add contributors, go to the “Editors” tab in an event.
  • Click the “Participation” button in the right hand side
  • Here you can find forms to add individual users by their username or add multiple users at once.
    • To add multiple editors at once to an event, you need to add the usernames in a text list, with returns but no other punctuation in between usernames and without the “User:” prefix.

Allowing contributors to request accounts

Program organizers can allow participants to request accounts through the tool. To allow account requests within event:

  • Go to the "Actions" box on the right hand side within an event.
  • Click on the "Enable account requests"
  • Confirm that you want to enable accounts in the dialogue.
  • Users can make account requests.

Note: After users make account requests, organizers will see a link to the requested accounts for their program and can create them. A temporary password will be sent to the email for each requested account when it is created. An Admin for the dashboard can also see pending account requests across all events and process them all with one click.

Assigning articles to editors

For classroom assignments and some events, the program facilitators may want to assign which articles participants are working on. This feature allows facilitators to help contributors pick topics to work on, and identify the right content within the scope of the program. To assign an article, see:

  • Once a program has editors signed up, go to the “Editors” tab.
  • Click the “Assign Articles” tab
  • For each editor you should get the following options:
    • ”Assign an article” -- allows you to assign contributors which article to work on
    • ”Assign a review” -- allows you to assign contributors which article someone else is working on for peer review. This second option is an organizing tool only, it doesn’t change how metrics are tracked for individual contributor elements.
  • Click the “Done” button at the top to save

Adding suggested or “Available” articles

 
The articles tab within the programs and events dashboard that provides an interface for observing the worked on articles for a program

For many programs and events, you will want to offer suggested articles for folks to work on. To do this:

  • Go to the “Articles” tab in a program
  • Scroll to the bottom of the page
  • Click on the “Add an available article” button
  • Enter the article title and click “Assign”

Once these articles are available in the software, participants in the program will be able to assign themselves to each article, through their “My dashboard” section.

Tracking Wikidata items in an Article Scoped Program using Petscan

An Article Scoped Program can use Petscan output to track articles. This is particularly useful in Wikidata-focused programs, where you can use this function to track items that are the results of a specific SPARQL query.

  • Run a Petscan search on the wiki of your choice. To track Wikidata items, you can enter a SPARQL query on the Other sources tab.
  • After running the query in Petscan, note its PSID, above the results list.
  • Set your program type to be an Article Scoped Program via the Edit Details options in the Home tab.
  • In the Articles tab of your program's dashboard, enter the PSID in the Tracked Categories, PSID & Templates section.
  • Now the program will track edits to the articles/items in the result list of the Petscan query. If the query yields a large result, it can take several hours for the tracking on the dashboard to catch up.

Metrics and tracking

Across the top of each program page, is a series of numbers. These numbers are aggregate statistics compiled over the window of time described for the event in the “Program details”.

The numbers are collected once your participants start editing. The software to count these metrics sometimes takes a little while to run, but an edit should definitely be counted in the metrics within 24 hours. If metrics are not running properly, please reach out to dashboard wikimedia org.

 
Every program has a series of metrics across the top. Read this section to see those metrics explained.

The metrics data at the top of the page includes:

  • Articles Created -- this is the number of new articles created by the cohort of the users within the program. The list of articles created can also be found alongside the articles edited on the "Articles" tab [Note 1]
  • Articles edited -- this is the number of articles contributed by the cohort of users within the program.[Note 1]
  • Total edits -- this is the total number of edits from the cohort during the program timeline.[Note 1]
  • Editors -- this is the number of editors that have been added to the cohort for the program, either through self-sign up or through the program organizer enrolling them
  • Bytes added -- this is the number of bytes contributed to the project from recorded edits based on the number of bytes added per edit. [Note 1]
  • Article views-- this is an estimate of the number of pageviews to the pages contributed to as part of the program, from the first edit to that page by an enrolled editor.
  • Commons Uploads -- this is the number of media files uploaded to Wikimedia Commons over the course of the program.

Note

  1. a b c d Note: The software only tracks contributions on the programs 'Tracked Wikis'.

For more metrics tracked by the dashboard go to the Glossary of the Dashboard Metrics.

Running data on historical events

Dashboard Q&A (4 of 5)

The software is capable of recovering historical data for an event which was not using the Programs and Events dashboard live for the event. To do this, simply create a program that has time and date settings in the past. Once the event is created and you have populated the event with the historical editors for the event, click the "schedule data update" button on the far right in the "Actions" section.

Note: Page view data from the point of entering contributions: the dashboard only uses pageview data from the moment in which it starts tracking the contributions of participants. It does not retrieve historical pageview data.

Campaign Feature

Campaign Feature Tutorial

The dashboard also supports “Campaigns” -- strings of events like “Art and Feminism” or a specific regional or country-level education program, where the structure and information needed for each event is similar, and there is a need to compile multiple events into one body of metrics. This feature allows you to create a campaign that can encompass many programs. You can also create a program within a campaign while having convenient access to useful program resources such as templates, program details, data tracking, etc. Overall, the feature allows you to better connect with other program organizers that are joining your campaign and visualize in one place your collective impact.

Steps for creating a campaign

To create a campaign,

  1. Start in the "Find Programs" menu
  2. At the bottom of the list of "Active Campaigns", click the "Create a New Campaign" button
  3. In the initial dialogue box for campaigns, create a title and description of that campaign. If applicable, also apply start and end dates to the campaigns (say if events are run in a series of activities). Once you have filled out these forms, click "Create a Campaign"
    • Once the campaign is created you can edit the details until someone begins creating programs within the campaign.
  4. Once the campaign is created, you can click the "Edit" button within the campaign. This allows for three options:
    • "Edit Description" which allows you to modify the description from the original template.
    • "Edit Details" which allows you to modify the core details for the campaign
    • "Edit Template" in "Program Template" section, which allows you to develop a "Program template" which can be used to share commonly needed materials or descriptions that local program leaders can use to generate pages for their local programs or events.

Creating an event within a Campaign

Once a campaign is created, program leaders can go to the main Campaign page and click "Create Program". This uses the Program template to create a pre-filled draft form, which can be used like other program creation dialogues (see above). If a program is created outside of the campaign that you would like to add to the campaign, this can be done by editing program details: Go to the page of the program, click "Edit details", and at the bottom of program details you will find the line with "Campaigns:" and "+" button. Then save your changes.

Downloading Campaign or Program Statistics from the Dashboard

To download statistics, follow these steps:

  • In the "My Dashboard" or "Find Programs" tab
  • Locate the desired Program or Campaign for which you want to download statistics
  • Open the desired program or campaign
  • If it's a campaign:
    • Navigate to the "Home" tab on that Campaign's page
    • Click the "Download Stats" button
 
  • If it's a program:
    • Navigate to the "Home" tab on that Program's page
    • Scroll down to the bottom where you'll find the "Actions" section
    • Click the "Download Stats" button
 
  • In the dialog that pops up, look through the data available for download, and click on the button labeled with the title of the data you wish to download.

Customizing what to track with an "Article Scoped Program"

@ 3:59 the dashboard demo begins

In a scenario where a user contributes to multiple articles and wishes to compile contribution counts for a specific subset of articles rather than the entire collection, opting for an "Article Scoped Program" is the most suitable choice. When the program type has been changed to an “Article Scoped Program” the Dashboard will only track edits to the articles that you categorized to be tracked.

To enable this feature the first step is to select “Create an independent program” from the dashboard page and then select “Article Scoped Program”. If the user has existing programs and the option “Create New Program” or “Clone Previous Program” pops up after selecting “Create an independent program”, select “Create New Program” and then select “Article Scoped Program”. Fill in the inputs presented with details of your program and then set the activity tracking period (start and end dates). The next step is choosing a scoping method.

Note that all scoping methods can be selected at once and individual scoping methods can also be added to the program from the “Articles” tab.

There are four (4) scoping methods to choose from:

  1. Categories: this feature when selected enables the dashboard to track articles in specific wiki categories.
  2. PagePile: this enables the Dashboard to track a collection of articles with a unique identifier that doesn't change over time. (PagePile Tool)
  3. PetScan: is a query tool that allows the Dashboard to extract data and generate lists of related pages that match certain criteria (categories, templates, wikilinks, and much more). A PetScan query ID is generated and can be used to configure a set of articles and enable tracking on the dashboard.
  4. Templates: this feature allows articles to be tracked based on certain templates they contain.

After the scoping method options, each method follows up with input fields for the user to fill in with the appropriate information.

Categories:

The user enters the categories they would like the dashboard to track, and selects the subcategory depth value (0 is the default value i.e. articles directly in that category) of the category/categories selected and wiki domain.

Page Pile:

The user enters the PagePile ID/URLs they would like the dashboard to track, selects the wiki domain, and also has the option of creating a PagePile using the official PagePile tool.

PetScan:

The user enters the PetScan ID/URLs they would like the dashboard to track, selects the wiki domain, and also has the option of creating a PetScan using the official PetScan tool.

Templates:

The user enters the template(s) they would like the dashboard to track and selects the wiki domain name.

Finally, the user selects “Create my Program!” and the “Article Scoped Program” configuration is complete. Also note that if a user is a facilitator of a program and would like to track their contributions on the dashboard, they would need to assign themselves to the article(s) as an editor.

Adding new training modules

The Dashboard's training module system uses pages on Meta to create and translate training content. The training content is made up of three kinds: Libraries, Modules, and Slides. A Library is a set of one or more related Modules, and a Module is a series of Slides.

Libraries

The set of training libraries that the Dashboard knows about is defined at Training modules/dashboard/libraries. A new library should have two parts:

  1. a `.json` page that defines the libary's ID number, url slug, and the wiki page which holds the rest of the libary definition. Example: User:Ragesoss/dashboard libraries/editathons.json.
  2. a wiki page that defines the library's title, description and contents. Example: Training modules/editathons/library

To create a new library, follow the examples above and then add a link to the `.json` page to the list of libraries. The ID should be the lowest number not already taken by another library.

To add a new module to an existing library, find the wiki page that defines which modules are included and edit it. (If the modules are all listed on the `.json` page instead of on a wiki page, it will need to be converted to the wiki page format first.)

Modules

The set of training libraries that the Dashboard knows about is defined at Training modules/dashboard/modules. A new module should have two parts:

  1. a `.json` page that defines the modules ID number, url slug, the series of url slugs for each slide in the module, and wiki page which holds the rest of the details. Example User:Ragesoss/dashboard modules/wikipedia-essentials.json
  2. a wiki page that defines the module's title and description. Example: Training modules/wikipedia-essentials

To create a new module, follow the examples above, then add a link to the `.json` page to the list of modules. Use a 5-digit ID number that isn't already taken by another module, and include the ID on the page so that we can easily see which IDs are taken.

Slides

The set of training slides that the Dashboard knows about is defined at Training modules/dashboard/slides. A new slide can be created with only a wiki page, like this.

  • The slide's unique ID — followed by a dash — should be the first part of the title of the subpage. (For the example above, the ID is 10304.)
  • The url slug for the slide should be the rest of the subpage title. (For the example above, the url slug is `neutral-point-of-view`.)
  • The slide title is defined in a header at the beginning of the page. (For the example above, the title is "Pillar Two".)
  • The contents of the slide come after the header. You can use basic wikitext formatting. For images and quizzes, special templates are required. Follow the examples on existing slides: slide with an image, slide with a quiz.

Add new slides, grouped and ordered by the module they are in, to the list of slides. To make sure every slide has a different ID, the first three digits of the ID should correspond to the training module ID. For example, the 'wikipedia-essentials' module has ID 10003. Every slide in that module has an ID that starts with 103 (going from 10301 to 10322).

Supported wikitext

The Dashboard uses the wikitext of a slide page (and its translations), and converts it into the Dashboard's own data format. After extracting the slide title and the quiz template (if applicable), the rest of the wikitext is treated as content of the slide. This wikitext is converted from MediaWiki syntax to Markdown (via the Pandoc library), which is then rendered as HTML within a slide on the Dashboard. While most standard wikitext converts accurately to Markdown, no templates or transclusion will work. The Dashboard has special handling of the {{Training module image}} template, converting it to HTML that is roughly equivalent to what the template renders here on Meta. Hyperlinks should be formatted as external links, because wikilinks are treated as relative links and won't point to the same place when rendered from the Dashboard.

Activating a new module

Once you have created a new module (or updated the slides in an existing module), you can make the Dashboard refresh its content by visiting the training reload URL and specifying the url slug of the module you want to update: https://outreachdashboard.wmflabs.org/reload_trainings?module=MODULE_SLUG.

Known Issues

Dashboard Conclusion and What's Coming Next (5 of 5)

Because this is a beta tool, not everything is working perfectly. Here is one of the issues that we know about that may make interfaces with the tool difficult:

  • The metrics may not be entirely reflective of your local language or project context (for example, more bytes are needed to code languages with Cyrillic script than Latin script, and "Bytes added" for the same count of symbols in different languages will be different).

A full and current list of known bugs can be found here.

Report another bug -- If you find a bug that is not listed above, please report it by emailing a description of the bug (with screenshots if possible) to dashboard wikimedia org or submitting the bug through Phabricator.

Give us feedback!

We do have a beta users check in meeting every two weeks for users to share how they are using the Dashboard, share any bugs they found, or ask for advice from other Dashboard facilitators. Let us know if you would like to participate!