DescriptionMicrochip for Carbon Nanotube Field Effect Transistors fabrication.jpg
English: Scanning Electron Microscopy image of a die with Carbon Nanotubes based Field Effect Transistors to be fabricated. Image obtained during one of the fabrication steps, after hydrofluoric (HF) acid wet etching and SF6 based Inductively Coupled Plasma dry etching steps. Glowing structures in the middle are charged photoresist residues. In this chip design each square test pad represents transistor's source or drain electrodes, across which single-walled Carbon Nanotube will be suspended during the subsequent fabrication stages. Scale: the width of the outermost square test pads is 150 micrometers. SEM image and fabrication by Aidar Kemelbay (NLA, Nazarbayev University), with the help of Dr. Emine Cagin (NTB Buchs, Switzerland) performed at FIRST - Center for Micro- and Nanoscience, ETH Zurich. Photolithography mask design - Dr. Kiran Chikkadi (ETH Zurich, MNS group).
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.